Home > Flat discs for stationary machines

Flat discs for stationary machines

MT7 (A46N) - for cutting steels and cast iron

Articles MT7, MT8, MT22 and MT23 are discs that have to be used on stationary machines with a mechanical piece clamping device. The discs are built with considerable reinforcements inside that ensure high cutting speed, cold cutting, a good lifetime and outstanding safety during use.

	⌀ mm	Development mm	Width mm	Rolls m	Joint	Thickness mm	Lenght m	Lenght mm	Bores	Bore mm	Bore	Coupling	Hardness	⌀ Shaft mm	Shape	Abrasive sides	Grits	Degree	Description	Wheel bore mm	Bores available mm	Reduced bores available mm	Packaging	Indicated for:	Indicated for articles	Indicated for wheels ⌀ mm	To use with discs ⌀	Max RPM	Best RPM

MT7-G	300	2.5	25.4	25	4000

MT8 (A24N) - for cutting steels and cast iron

Article MT8 is a disc that has to be used on stationary machines with a mechanical piece clamping device. The disc is built with considerable reinforcements inside that ensure high cutting speed, cold cutting, a good lifetime and outstanding safety during use.

	⌀ mm	Development mm	Width mm	Rolls m	Joint	Thickness mm	Lenght m	Lenght mm	Bores	Bore mm	Bore	Coupling	Hardness	⌀ Shaft mm	Shape	Abrasive sides	Grits	Degree	Description	Wheel bore mm	Bores available mm	Reduced bores available mm	Packaging	Indicated for:	Indicated for articles	Indicated for wheels ⌀ mm	To use with discs ⌀	Max RPM	Best RPM

MT8-G	300	3.8	30	25	5100

MT22 (A46N) - for cutting steels and cast iron

Article MT22 is a disc that has to be used on stationary machines with a mechanical piece clamping device. The disc is built with considerable reinforcements inside that ensure high cutting speed, cold cutting, a good lifetime and outstanding safety during use.

	⌀ mm	Development mm	Width mm	Rolls m	Joint	Thickness mm	Lenght m	Lenght mm	Bores	Bore mm	Bore	Coupling	Hardness	⌀ Shaft mm	Shape	Abrasive sides	Grits	Degree	Description	Wheel bore mm	Bores available mm	Reduced bores available mm	Packaging	Indicated for:	Indicated for articles	Indicated for wheels ⌀ mm	To use with discs ⌀	Max RPM	Best RPM

MT22-H	350	3	25.4	25	3440

MT23 (A24N) - for cutting steels and cast iron

Article MT23 is a disc that has to be used on stationary machines with a mechanical piece clamping device. The disc is built with considerable reinforcements inside that ensure high cutting speed, cold cutting, a good lifetime and outstanding safety during use.

	⌀ mm	Development mm	Width mm	Rolls m	Joint	Thickness mm	Lenght m	Lenght mm	Bores	Bore mm	Bore	Coupling	Hardness	⌀ Shaft mm	Shape	Abrasive sides	Grits	Degree	Description	Wheel bore mm	Bores available mm	Reduced bores available mm	Packaging	Indicated for:	Indicated for articles	Indicated for wheels ⌀ mm	To use with discs ⌀	Max RPM	Best RPM

MT23-H	350	4	30	25	4400